Instruments, speakers and rooms: string tension and fret layout, crossovers and amplifier power, room modes and reverberation, sound insulation of walls, resonators and tuned bars. Each calc shows the acoustics behind the numbers.
Wired White v1 Design a two-way passive crossover with Butterworth, Bessel or Linkwitz–Riley filters. Compare real driver loading, Zobel correction, L-pad losses and the modeled amplitude and phase sum.
Wired White v1 Calculate 12-TET fret spacing and exact fanned-fret geometry, with neutral fret, string spread, known compensation offsets, coordinate tables, and a calibrated drawing.
Wired White v1 Calculate axial, tangential and oblique room modes, compare octave-band RT60, and size replacement treatment. Explore pressure nodes, listener position and trial bass-trap locations.
Wired White v1 Calculate string tension for any tuning and per-string scale length. Design a balanced guitar or bass set from target tensions using published unit weights.
Wired White v1 Estimate listener SPL and amplifier power with crest-factor headroom. Check speaker cable loss and damping across a driver's impedance curve.
Wired White v1 Design sealed and ported speaker boxes from Thiele–Small parameters. Compare bass response, cone excursion, port air speed and cabinet dimensions.
A full-cycle engineering service provider & learning platform with focus on sustainable industry sectors with the aim to educate and support students and companies.
Copyright © 2026
Please confirm you want to block this member.
You will no longer be able to:
Please allow a few minutes for this process to complete.
