3D Printed Gear Generator: Strength, Backlash and STL
Generate meshing involute spur gears with printable bores and hubs. Compare plastic tooth strength, speed heating, wear and backlash, then download STL or 3MF.
This 3D printed gear calculator generates a matched pair of external involute spur gears and checks the mechanisms that commonly limit a plastic drive: tooth-root bending, heating and flank wear. It is intended for engineers, students, prototype builders and people replacing a small mechanism’s gears. The solid model includes the actual tooth outline, a through bore and an optional hub on each gear.
Start with module, tooth counts and pressure angle. Add profile shift when a small pinion needs a thicker root. The zero-backlash centre distance is calculated from the sum of the shifts; the centre-distance adjustment is then added to it. Printing clearance thins both gears equally. The reported backlash range includes assembly tolerance. Uninterrupted involute engagement is checked across the entire centre-distance tolerance; an excessive tolerance blocks the results. Bore allowance is diametral and changes the exported hole, rather than changing the shaft diameter.
Enter driver torque, speed, required elapsed life and running duty fraction. Both gears use the selected material. The tool combines a geometric Lewis tooth form with the root stress correction and load-sharing structure used by VDI 2736 Part 2, edition June 2014. Its heat balance predicts separate root and flank temperatures. Temperature reduces the available fatigue strength, so the torque capacity is solved with the heating caused by that same torque. A separate wear calculation checks the required number of running cycles. The smallest of the two root limits, flank-temperature limit and wear limit governs.
The starting material properties cover PLA, PETG, ABS, nylon PA12 and POM. PLA, PETG and ABS use the named Bambu Lab grades in materials.filaments; PA12 and POM retain the earlier SLS and stock-material benchmarks. Maker values describe typical 100 % infill test specimens, with Z across the layers as the weak direction; conditioning and other print settings matter. The PLA fatigue starting curve comes from published printed-specimen research. Applying that curve shape to another polymer is a screening assumption. Open the advanced rating controls to replace the fatigue ratio, slope, friction, wear coefficient and heat-transfer coefficients with data for your material pair and print process. The thermal cutoff uses an HDT or service-temperature benchmark; the linear strength derating below it is an explicit conservative design law, not a measured temperature-dependent gear S–N curve.
Press play to follow the teeth through mesh. Markers travel along the active line of action, and the loaded tooth roots change colour with instantaneous load sharing and bending moment. The torque handle changes the applied load. The charts show how capacity and tooth temperature change with speed.
Use the solid card to inspect the gear generator STL or 3MF output. All exported dimensions are millimetres. The two bodies are separate parts in a meshing assembly; separate them on the slicer bed and print each with its flat face down. The hub is above the face, so this orientation needs no support. Filament is a solid-fill equivalent with the entered waste allowance; the slicer remains the final estimate.
This plastic gear strength calculation does not rate shafts, hubs, fasteners, thin rims, lubricated flank fatigue, long-term creep or thermal expansion of the centre distance. Confirm fit and running temperature on a prototype and qualify fatigue and wear coefficients before committing to production.
How it is calculated
Geometry and printable solids
Reference radii are and base radii are . The working angle at zero backlash solves ; KHK's tip-shortening convention maintains nominal tip/root clearance. Installation adjustment and its tolerance are applied afterwards. Backlash is calculated from the two involute tooth thicknesses at the actual working pitch circles, not only from a small-angle centre-distance approximation.
Each tooth joins an involute to the exact envelope of a circular rack-cutter corner. The preferred rack corner radius is . It is capped at 98% of the feasible maximum , obtained from the rack-tip-width limit in Amani (2016), §3.2.2, Eq. (3.10), including the entered tooth thinning. The 2% margin leaves a positive rack-tip land. The same capped radius is used by the trochoid, form-circle search, undercut threshold and 30° root-strength calculation. A rolling rack transformation and its normal offset generate the trochoid. For undercut teeth a root search trims the trochoid against the positive involute branch. Tip and root arcs close the outline. Contact endpoints are clipped to the involute form circles. The sampled closed outlines and bore holes are extruded and united with annular hubs.
Root strength
The 30° tangent to the generated root determines root chord , curvature and load lever arm . The geometric Lewis form is retained as . The VDI 2736-2:2014 / DIN 3990 Method C structure is , with . The stress correction is . Load is applied at the tip for the design root factors.
The Ezeh–Susmel printed-PLA reference curve uses maximum cyclic stress: , capped at half tensile strength for short life. Default and . A directional strength ellipse interpolates between in-plane strength and the effective through-layer ratio. For PLA, PETG and ABS this ratio is the smaller of the entered ratio and the maker's Z/X-Y tensile-strength ratio; PA12 and POM retain the entered ratio. Linear temperature retention is one at or below 23 °C and zero at the material cutoff. Permissible stress is the retained fatigue strength divided by the design safety factor.
Heat, wear and coupled capacity
The VDI 2736 Part 2, June 2014 heat balance is . Separate root and flank coefficients give separate temperatures. The mixed units of the heat coefficient are preserved explicitly. is integrated exactly over piecewise-linear rigid tooth-pair sharing along one base pitch; for ordinary two-pair meshes it reduces to .
VDI mean wear is , where is the active involute arc length. The safety factor also applies to the required-life wear torque limit. For each speed, 40 bisections solve each root limit while recomputing temperature at the trial torque. The reported torque is the minimum of both root limits, the flank cutoff limit and mean-wear limit. The speed sweep has 121 points; geometry and the sweep remain cached while the animation or torque handle moves.
Geometry validation
Before extrusion, every pair of nonadjacent edges of one sector (tooth and both half-root arcs) is checked for intersections, including collinear overlap and touching. Each sampled tooth must also stay inside its angular sector, with all its vertices outside the root circle, with a positive connecting root arc. Rotational symmetry then ensures that different teeth and root arcs cannot cross. Failed outlines produce no extruded body.
Backlash and tip clearance are checked at minimum centre distance. Contact ratio, both partial contact ratios and active involute contact are checked at both ends of the centre-distance tolerance. With , the active path length is the minimum of two constants, one term increasing in D and one decreasing in D. It is concave in D, so its minimum over the interval is attained at an endpoint. These endpoint checks therefore cover the entire tolerance interval. Capacity and temperature are rated at the nominal installed centre distance.
Printed material data
PLA, PETG and ABS rows are compatibility snapshots of materials.filaments: Bambu PLA Basic, PETG Basic and ABS TDS V3.0. Existing material keys are retained. The in-plane tensile strength feeds the fatigue curve, density feeds mass, and HDT at 0.45 MPa supplies the thermal screening cutoff. X-Y and Z tensile moduli and Z tensile strength are available in the material picker. Moduli are reference properties only: the rigid-mesh model does not calculate elastic deflection. PA12 and POM are absent from that filament table and retain their original values.
Assumptions
Both gears have the same polymer, face width and hub height. Teeth are fully dense, with sufficient perimeters and a sound root; the body behind each root is at least three modules thick. The solid-fill mass and filament estimate do not model slicer infill.
Friction, specific wear and heat-transfer coefficients are constant for the selected operating range. Defaults are starting assumptions: friction 0.20, wear coefficient 10⁻⁶ mm³/(N·m), root heat coefficient 2100 in the displayed VDI mixed units, and flank/root heat ratio 1.5. The root coefficient is an openly published POM/PA benchmark, not a measured printed-PLA value. The entered through-layer ratio (default 0.5) is an adjustable conservative cap on the maker's Z/X-Y tensile-strength ratio; for PA12 and POM it remains the full directional ratio. The strength ellipse is an engineering assumption. Replace the cap and fatigue inputs with process-specific tests.
PLA, PETG and ABS use typical 100 % infill test-specimen properties from the maker TDS referenced by materials.filaments. Z, across the layers, is the weak strength direction. Bambu PLA Basic specimens were annealed/dried at 55 °C for 8 h and ABS at 80 °C for 12 h; PETG Basic was tested as printed. These conditions and the named grades must be considered when applying the values to another print. PA12 represents EOS PA 2200 SLS, and POM represents Ensinger stock POM-C; neither is a qualified FFF filament dataset. The default PLA fatigue curve is a specimen-based reference. Using its fraction and slope for the other materials is a screening extrapolation. The thermal cutoff and linear retention law are not manufacturer fatigue curves.
Where it applies
Implements the heat and mean-wear method of VDI 2736 Part 2, edition 2014-06, with a generated-profile adaptation of the Method C root geometry. It is a preliminary design rating; check against the standard in force. Grade-specific gear S–N curves, temperature-dependent friction and calibrated heat/wear coefficients are needed for a production life claim.
Rigid involute kinematics omit elastic contact extension, dynamic impact, misalignment beyond the entered load factor, viscoelastic hysteresis heating and wear-driven profile evolution. Mean wear is an accumulated initial-profile estimate, not a running geometry update. The animated root colours show the computed instantaneous section stress with equal sharing between simultaneous tooth pairs; they are not an FE stress field. The stationary common normal is the line of action; the contact points and teeth move along it.
Thermal expansion, moisture swelling, creep, bore torque transfer, shaft strength, hub stress and lubricated pitting are outside this model. Backlash is the cold geometric value. Use the face-load simplification only for b/m ≤ 12, the stress-correction notch parameter 1 ≤ qₛ = sF/(2ρF) < 8 for each gear (ABS 2013, 4-3-1A1/23.7, printed p. 156), and the fatigue screening curve principally over 10⁴–10⁸ cycles. A tooth tip and any nonzero-height hub wall require at least two entered nozzle widths. Setting hub height to zero removes the hub solids, diameter controls and hub-diameter constraints. Undercut is generated and trims the available contact path; severe undercut can leave insufficient contact ratio.
There are 40 points on each involute and root segment at the defaults, plus 12 subdivisions on each tip and root arc. The resolution control refines the flank segments; a volume convergence check compares 40 with 80 points. The exact circular bore tessellation comes from the solids library. Mesh tessellation affects print chord accuracy and mass, not the analytic radii, strength factors or heat balance. Export the separate mm bodies, move them apart in the slicer and keep the flat faces on the bed.
References
- VDI 2736 Part 2:2014-06, Thermoplastic gear wheels — Cylindrical gears — Calculation of the load-carrying capacity. https://www.vdi.de/en/home/vdi-standards/details/vdi-2736-blatt-2-thermoplastic-gear-wheels-cylindrical-gears-calculation-of-the-load-carrying-capacity
- KHK Gear Technical Reference, Calculations for Standard Spur Gears and Profile Shifted Spur Gears, Tables 4.1 and 4.3. https://khkgears.net/new/gear_knowledge/gear_technical_reference/calculation_gear_dimensions.html
- Zorko, Kalister and Černe, Plastic Gear Testing Methods—Characterization of Crucial Material Data Required for Reliable Design of Plastic Gears, Gear Technology, May 2024, equations 1–7. https://www.geartechnology.com/plastic-gear-testing-methods-characterization-of-crucial-material-data-required-for-reliable-design-of-plastic-gears
- A. Pogačnik and J. Tavčar, Accelerated Testing and Temperature Calculation of Plastic Gears, Gear Solutions, December 2016 (online 15 December 2016). Thermal benchmark uses Tables 1, 5 and 6 of the linked 10-page manuscript; its title page confirms these authors. https://globasdistribution.com/wp-content/uploads/2017/01/article_kisssoft_vdi_2736_gear_temperature.pdf
- Tunalioglu and Agca, Wear and Service Life of 3-D Printed Polymeric Gears, Polymers 14 (2022), 2064. https://doi.org/10.3390/polym14102064
- Ezeh and Susmel, Reference strength values to design against static and fatigue loading polylactide additively manufactured with in-fill level equal to 100%, Material Design & Processing Communications 1 (2019), e45. https://doi.org/10.1002/mdp2.45
- EOS PA 2200 Balance material data, accessed 11 November 2026. https://www.eos.info/polymer-solutions/polymer-materials/data-sheets/mds-pa-2200
- Ensinger TECAFORM AH natural POM-C material data, accessed 11 November 2026. https://www.ensingerplastics.com/en-us/shapes/acetal-tecaform-ah-natural
- Background design reading (not a source of copied material tables): G. Erhard, Designing with Plastics, 1st English edition, Hanser, 2006, ISBN 9783446225909. https://www.hanserpublications.com/Designing-with-Plastics/978-3-446-22590-9
- Background gear design reading: S. P. Radzevich, Dudley's Handbook of Practical Gear Design and Manufacture, 3rd edition, CRC Press, 2016, ISBN 9781498753104; publisher preview. https://api.pageplace.de/preview/DT0400.9781498753111_A27461661/preview-9781498753111_A27461661.pdf
- A. Amani, Computationally efficient analysis & design of optimally compact gear pairs and assessment of gear compliance, TU Delft doctoral thesis, 2016, §3.2.2, printed pp. 33–35, Eq. (3.10). https://pure.tudelft.nl/ws/portalfiles/portal/7307590/FINAL_PhD_thesis_Amin_Amani_For_library.pdf
- Bambu Lab, PLA (Bambu PLA Basic), Technical Data Sheet V3.0, printed-specimen properties p. 2 and conditioning pp. 3–4; materials.filaments compatibility data. https://store.bblcdn.com/s1/default/58b85d0f3db94878854a28fdb8a0006e/Bambu_PLA_Basic_Technical_Data_Sheet.pdf
- Bambu Lab, PETG (Bambu PETG Basic), Technical Data Sheet V3.0, printed-specimen properties p. 2 and conditioning pp. 3–4; materials.filaments compatibility data. https://store.bblcdn.com/s1/default/cb94589bf7994fdcbfa833badefae9cd/Bambu_PETG_Basic_Technical_Data_Sheet.pdf
- Bambu Lab, ABS (Bambu ABS), Technical Data Sheet V3.0, printed-specimen properties p. 2 and conditioning pp. 3–4; materials.filaments compatibility data. https://store.bblcdn.com/s7/default/23b4cf2b83d5470bb96d19970b5f3ae8/Bambu_ABS_Technical_Data_Sheet_V3.pdf
- American Bureau of Shipping, Rules for Building and Classing Offshore Support Vessels, 2013, Part 4, 4-3-1A1/23.7, printed p. 156 (PDF p. 162): stress-correction notch-parameter range 1 ≤ qₛ < 8. This corroborates the geometric correlation range; it is not a plastic allowable-stress source. https://ww2.eagle.org/content/dam/eagle/rules-and-guides/archives/conventional_ocean_service/180_osv_2013/osv_part_4_e-july13.pdf
Inputs
| Input | Symbol | Unit | Default |
|---|---|---|---|
| Module | m | mm | 2 |
| Driver teeth | z1 | 20 | |
| Driven teeth | z2 | 40 | |
| Pressure angle | alpha | deg | 20 |
| Driver profile shift Positive shift thickens the tooth at the reference circle. | x1 | 0 | |
| Driven profile shift | x2 | 0 | |
| Face width | b | mm | 10 |
| Driver shaft diameter | bore1 | mm | 5 |
| Driven shaft diameter | bore2 | mm | 8 |
| Diametral bore allowance Added to each shaft diameter in the exported bore. | bore_clear | mm | 0.25 |
| Hub height above face Set to zero for hubless gears. | hub_h | mm | 5 |
| Driver hub diameter | hub1 | mm | 16 |
| Driven hub diameter | hub2 | mm | 22 |
| Pair tooth-thinning clearance Total tangential backlash added at reference circles, split equally between gears. | j_print | mm | 0.2 |
| Centre-distance adjustment Added to the zero-backlash shifted centre distance. | da | mm | 0.1 |
| Centre-distance tolerance ± | a_tol | mm | 0.05 |
| Driver torque | T_drive | N*m | 0.15 |
| Driver speed | n1 | rpm | 300 |
| Required operating life Elapsed hours; duty cycle sets the fraction spent running. | life_h | h | 100 |
| Running duty fraction | duty | 1 | |
| Design safety factor | SF | 1.5 | |
| Gear material (both gears) PLA, PETG and ABS use the named Bambu TDS grades; PA12 and POM retain their earlier benchmarks. | polymer | PLA | |
| Ambient temperature | T_amb | degC | 25 |
| Gear axis to build vertical 0° lies flat; 90° puts the gear axis parallel to the bed. | build_angle | deg | 0 |
| Through-layer / in-plane strength Caps the maker's Z/X-Y tensile-strength ratio; for PA12 and POM this is the directional ratio. | eta_Z | 0.5 | |
| Fatigue / tensile ratio at 2 million cycles PLA reference is 0.10; other polymers require a measured fatigue curve. | f_ref | 0.1 | |
| S–N inverse slope | sn_slope | 5.5 | |
| Sliding friction coefficient Material-pair value; lubrication changes friction and wear independently. | mu_pair | 0.2 | |
| Root heat coefficient VDI mixed-unit coefficient; 2100 is a published POM/PA benchmark, not a measured printed-PLA value. | k_root | K*m^0.75*mm^1.75/(W*s^0.75) | 2100 |
| Flank / root heat coefficient Default 1.5 is an explicit design assumption; calibrate with measured flank temperatures. | k_flank_ratio | 1.5 | |
| Housing thermal resistance Zero represents open gears; enclosed gears need a measured housing-to-ambient resistance. | R_house | K/W | 0 |
| Specific wear coefficient Illustrative pair coefficient: replace with measured wear volume / normal load / sliding distance. | kw | mm^3/(N*m) | 0.000001 |
| Permitted mean wear / module | wear_frac | 0.1 | |
| Root load factor Includes application, dynamic and alignment effects; VDI simplification needs b/m ≤ 12. | KF | 1.25 | |
| Filament diameter | filament_d | mm | 1.75 |
| Extrusion and purge allowance | waste_frac | 0.05 | |
| Samples per flank segment Each involute and trochoidal segment uses this many points. | N_profile | 40 | |
| Speed chart maximum | n_chart_max | rpm | 3000 |
| Driver rotation | theta | deg | 5 |
| Nozzle diameter | nozzle_d | mm | 0.4 |
Results
With the default inputs above, the calc gives:
| Result | Value |
|---|---|
| Allowable driver torque | 0.207 N·m |
| Allowable input power | 6.49 W |
| Governing capacity limit | Driver root bending |
| Gear ratio | 2 |
| Driven speed | 150 1/min |
| Installed centre distance | 60.1 mm |
| Transverse contact ratio | 1.586 |
| Minimum tangential backlash | 0.237 mm |
| Maximum tangential backlash | 0.311 mm |
| Driver root stress | 1.53 MPa |
| Driver permissible root stress | 2.15 MPa |
| Driven root stress | 1.41 MPa |
| Driven permissible root stress | 2.49 MPa |
| Driver flank temperature | 27 °C |
| Driven flank temperature | 26 °C |
| Driver mean wear at required life | 0.0004 mm |
| Driven mean wear at required life | 0.0002 mm |
| Pair solid mass | 0.0791 kg |
| Filament length, solid print | 27.86 m |
| Minimum contact ratio over centre tolerance | 1.562 |
Checked against sources
Each case below was calculated by this calc and agrees with the value from its source (within the tolerance where one is shown).
KHK Table 4.1 — standard 12/24 geometry
Source: Independent published example: KHK Gear Technical Reference Table 4.1, printed p.606 (attached excerpt p.1). The 12-tooth pinion is undercut; the check is for the published reference/root/tip geometry, not an assertion that its untrimmed path is usable.
Inputs: Module = 3 mm; Driver teeth = 12; Driven teeth = 24; Centre-distance adjustment = 0 mm; Centre-distance tolerance ± = 0 mm; Pair tooth-thinning clearance = 0 mm; the others as above.
| Result | Source | This calc |
|---|---|---|
| Zero-backlash shifted centre distance | 54 mm | 54 mm |
| Driver outside diameter | 42 mm | 42 mm |
| Driven outside diameter | 78 mm | 78 mm |
| Driver root diameter | 28.5 mm | 28.5 mm |
| Driven root diameter | 64.5 mm | 64.5 mm |
KHK Table 4.3 — shifted 12/24 geometry
Source: KHK Gear Technical Reference Table 4.3, printed p.608 (attached excerpt p.3), rounded published values. This checks the inverse involute, shifted centre distance and tip shortening independently.
Inputs: Module = 3 mm; Driver teeth = 12; Driven teeth = 24; Driver profile shift = 0.6; Driven profile shift = 0.36; Centre-distance adjustment = 0 mm; Centre-distance tolerance ± = 0 mm; Pair tooth-thinning clearance = 0 mm; the others as above.
| Result | Source | This calc |
|---|---|---|
| Zero-backlash shifted centre distance | 56.5 mm | 56.5 mm |
| Installed working pressure angle | 26.089 deg | 26.089 deg |
| Driver outside diameter | 44.84 mm | 44.84 mm |
| Driven outside diameter | 79.4 mm | 79.4 mm |
| Driver root diameter | 32.1 mm | 32.1 mm |
| Driven root diameter | 66.66 mm | 66.66 mm |
Pogačnik–Tavčar Table 5 — VDI thermal benchmark
Source: Pogačnik and Tavčar, Accelerated Testing and Temperature Calculation of Plastic Gears, Gear Solutions, December 2016; linked manuscript, Table 5a/b: measured 60 °C and published standard-model difference −11 K at 1176 rpm, 0.42 N·m, implying 49 °C. Our integrated geometric loss gives about 50.5 °C; 2 K permits the rounded benchmark and unspecified loss-factor details without changing the equations. This compares implementations; the paper's roughly 20 K model-to-measurement deviation is not a printed-material validation. Material choice does not enter this heat equation.
Inputs: Module = 1 mm; Driven teeth = 20; Face width = 6 mm; Driver hub diameter = 10 mm; Driven hub diameter = 10 mm; Driver shaft diameter = 2 mm; Driven shaft diameter = 2 mm; Centre-distance adjustment = 0.05 mm; Centre-distance tolerance ± = 0 mm; Pair tooth-thinning clearance = 0 mm; Driver speed = 1,176 rpm; Driver torque = 0.42 N·m; Ambient temperature = 23 °C; Sliding friction coefficient = 0.18; Nozzle diameter = 0.25 mm; the others as above.
| Result | Source | This calc |
|---|---|---|
| Driver root temperature | 49 ± 2 °C | 50.485 °C |
Ezeh–Susmel — PLA reference fatigue point
Source: Ezeh & Susmel 2019, DOI 10.1002/mdp2.45: reference maximum cyclic fatigue stress at 2 million cycles is 10% of measured tensile strength. For the now selected Bambu PLA Basic TDS V3.0 (attached s10, p.2), in-plane tensile strength is 35 MPa, so the independent normalised reference point is 3.5 MPa. Replaces the former 6.2 MPa point tied to the superseded 62 MPa material dataset; no formula is fitted to a reference.
Inputs: Required operating life = 111.1 h; the others as above.
| Result | Source | This calc |
|---|---|---|
| Driver fatigue strength at 23 °C | 3.5 MPa | 3.5 MPa |
Amani Eq. 3.10 — maximum 20° rack-tip radius
Source: Amani 2016 TU Delft thesis, §3.2.2, printed p.34 (attached excerpt p.3), reports maximum corner-radius coefficient 0.47 for dedendum 1.25 and pitch thickness coefficient 0.5 at 20°. The analytical value is about 0.47188; tolerance allows the published two-decimal rounding. This verifies the unthinned geometric limit, independently of the chosen 98% cap.
Inputs: Pair tooth-thinning clearance = 0 mm; the others as above.
| Result | Source | This calc |
|---|---|---|
| Maximum rack corner radius / module | 0.47 ± 0.005 | 0.4719 |
PLA TDS — through-layer reference fatigue point
Source: Bambu PLA TDS V3.0, attached s10 p.2: measured Z tensile strength. Ezeh & Susmel 2019, DOI 10.1002/mdp2.45 (attached s8 p.2), gives the independent fatigue reference point as 10% of tensile strength at 2 million cycles. A 90° build and eta_Z=1 exercise the maker's directional ratio rather than the conservative user cap. This checks data transfer and the published normalised curve; it is not a gear endurance validation.
Inputs: Gear axis to build vertical = 90 deg; Through-layer / in-plane strength = 1; Required operating life = 111.1 h; the others as above.
| Result | Source | This calc |
|---|---|---|
| Driver fatigue strength at 23 °C | 3.1 MPa | 3.1 MPa |
PETG TDS — through-layer reference fatigue point
Source: Bambu PETG TDS V3.0, attached s11 p.2: measured Z tensile strength. Ezeh & Susmel 2019, DOI 10.1002/mdp2.45 (attached s8 p.2), gives the independent fatigue reference point as 10% of tensile strength at 2 million cycles. A 90° build and eta_Z=1 exercise the maker's directional ratio rather than the conservative user cap. This checks data transfer and the published normalised curve; it is not a gear endurance validation.
Inputs: Gear material (both gears) = PETG; Gear axis to build vertical = 90 deg; Through-layer / in-plane strength = 1; Required operating life = 111.1 h; the others as above.
| Result | Source | This calc |
|---|---|---|
| Driver fatigue strength at 23 °C | 3.5 MPa | 3.5 MPa |
ABS TDS — through-layer reference fatigue point
Source: Bambu ABS TDS V3.0, attached s12 p.2: measured Z tensile strength. Ezeh & Susmel 2019, DOI 10.1002/mdp2.45 (attached s8 p.2), gives the independent fatigue reference point as 10% of tensile strength at 2 million cycles. A 90° build and eta_Z=1 exercise the maker's directional ratio rather than the conservative user cap. This checks data transfer and the published normalised curve; it is not a gear endurance validation.
Inputs: Gear material (both gears) = ABS; Gear axis to build vertical = 90 deg; Through-layer / in-plane strength = 1; Required operating life = 111.1 h; the others as above.
| Result | Source | This calc |
|---|---|---|
| Driver fatigue strength at 23 °C | 2.8 MPa | 2.8 MPa |

Responses